Eemax Water Heater Not Turning On: Causes and Solutions

Eemax water heaters are designed to provide hot water on demand, without the need for a storage tank. They are energy-efficient, compact, and easy to install. However, like any appliance, they may encounter some issues from time to time. One of the most common problems is when the water heater does not turn on at all, indicating a loss of power or a major fault.

In this blog post, we will explain what causes this problem, how to troubleshoot it, and how to fix it. We will also answer some frequently asked questions about Eemax water heaters and their performance.

What Causes the Water Heater Not Turning On Problem?

The water heater not turning on problem can be caused by various factors, such as:

Faulty wiring or connections

If the wires or connectors are loose, damaged, or corroded, they may cause a loss of power or a short circuit, preventing the unit from turning on.

Faulty circuit breaker or fuse

If the circuit breaker or fuse that supplies power to the unit is tripped or blown, it may cause a loss of power or a surge, preventing the unit from turning on.

Faulty power switch or button

If the power switch or button on the front panel of the unit is broken or stuck, it may prevent the unit from turning on.

Faulty thermostat or sensor

If the thermostat or sensor is malfunctioning, they may prevent the unit from turning on by detecting a false error or fault.

Faulty heating element

If the heating element is burned out, broken, or clogged, it may prevent the unit from turning on by causing an open element error or an over temperature error.

How to Troubleshoot and Fix the Water Heater Not Turning On Problem?

The first step to troubleshoot and fix the water heater not turning on problem is to identify what kind of problem you are dealing with. You can do this by checking the following:

The power supply

Make sure that the unit is plugged in and that the circuit breaker or fuse is not tripped or blown. If you have a multimeter, you can test the voltage and current at the terminal block of the unit.

The power switch or button

Make sure that the power switch or button on the front panel of the unit is not broken or stuck. If you have a screwdriver, you can try to loosen or tighten it.

The thermostat and sensor

Make sure that the thermostat and sensor are not damaged or malfunctioning. If you have a multimeter, you can test their resistance and continuity.

The heating element

Make sure that the heating element is not damaged or clogged. If you have an ohmmeter, you can test its resistance.

Frequently Asked Questions

Here are some of the most common questions that people have about Eemax water heaters and their performance:

Q: How long do Eemax water heaters last?

A: Eemax water heaters are designed to last for up to 10 years with proper maintenance and care. However, this may vary depending on your usage patterns, water quality, and environmental conditions.

Q: How do I maintain my Eemax water heater?

A: To maintain your Eemax water heater in good condition, you should:

• Flush it regularly to remove any sediment or scale buildup that may affect its performance or efficiency.
• Replace any worn out or damaged parts as soon as possible to prevent further damage or malfunction.
• Follow the manufacturer’s instructions for installation, operation, and safety precautions.

Q: How do I flush my Eemax water heater?

A: Flushing your Eemax water heater is a simple process that can help prevent sediment or scale buildup that may affect its performance or efficiency. To flush your Eemax water heater, you should:

• Turn off the power supply and water supply to the unit and wait for a few minutes.
• Connect a hose to the drain valve and place the other end in a bucket or a sink.
• Open the drain valve and let the water flow out until it runs clear.
• Close the drain valve and disconnect the hose.
• Open the water supply and power supply to the unit.

Q: What are the benefits of Eemax water heaters?

A: Eemax water heaters have many benefits, such as:

• They provide hot water on demand, without wasting energy or water by heating and storing it in a tank.
• They are compact and easy to install, saving space and reducing installation costs.
• They are energy-efficient and eco-friendly, reducing your carbon footprint and utility bills.
• They are durable and reliable, lasting for up to 10 years with proper maintenance and care.