Are you facing issues with your Riobel shower valve? Is it not providing you with the desired water temperature or flow rate? If so, don’t worry! In this article, we will guide you on how to adjust the Riobel shower valve so that you can enjoy a comfortable and refreshing shower experience.
Table of Contents
Understanding the Riobel Shower Valve
Before we jump into the adjustment process, it’s important to understand the basics of the Riobel shower valve. It is a mixing valve that controls the flow of hot and cold water to ensure a consistent water temperature. The valve has two controls, one for hot water and the other for cold water. Adjusting these controls will regulate the temperature of the water.
Tools Required for Adjustment
To adjust the Riobel shower valve, you’ll need a few tools that are easily available at any hardware store. These tools include a screwdriver, an Allen wrench, and a thermometer.
Step-by-Step Guide to Adjusting the Riobel Shower Valve
Now, let’s dive into the step-by-step guide to adjusting the Riobel shower valve.
Step 1: Turn off the Water Supply
Before starting the adjustment process, you must turn off the water supply to the shower. This will prevent any accidents or water damage.
Step 2: Remove the Handle
Next, remove the handle of the shower valve. You can do this by unscrewing the screw that is located under the handle with a screwdriver. Once the screw is removed, the handle will come off easily.
Step 3: Adjust the Temperature Limit Stop
The temperature limit stop is a small plastic piece located behind the shower handle. Its purpose is to prevent scalding by limiting the maximum temperature of the water. To adjust the temperature limit stop, use an Allen wrench to turn it clockwise or counterclockwise. Turning it clockwise will reduce the maximum temperature of the water, while turning it counterclockwise will increase it.
Step 4: Check the Water Temperature
After adjusting the temperature limit stop, turn on the water supply and let the water run for a few minutes. Then, use a thermometer to check the temperature of the water. If the water temperature is still not to your liking, you can continue to adjust the temperature limit stop until you get the desired water temperature.
Step 5: Adjust the Flow Rate
If you’re still not satisfied with the water flow rate, you can adjust it as well. To do this, remove the temperature limit stop and turn the screw located beneath it clockwise to decrease the flow rate or counterclockwise to increase it.
Step 6: Reinstall the Handle
Once you’re satisfied with the water temperature and flow rate, reinstall the handle of the shower valve.
Can I adjust the Riobel shower valve without any tools?
No, you’ll need a screwdriver, an Allen wrench, and a thermometer to adjust the Riobel shower valve.
Is it safe to adjust the Riobel shower valve on my own?
Yes, as long as you turn off the water supply and follow the step-by-step guide carefully, it is safe to adjust the Riobel shower valve on your own.
Why is my Riobel shower valve not providing hot water?
There could be several reasons why your Riobel shower valve is not providing hot water. It could be due to a faulty temperature limit stop or a clogged valve.