Installing a pot filler in an existing wall is a great way to upgrade your kitchen. Not only does it add convenience, but it also adds aesthetic value, too.
If you’re wondering how to go about installing one, this article will walk you through the process step by step. You’ll be able to have your pot filler up and running in no time!
Table of Contents
What Is A Pot Filler?
A pot filler is a type of kitchen faucet that extends from the wall to the stove, allowing for easy access to fill large pots with water.
These fixtures are popular in modern kitchens due to their convenience and ease of installation.
While they offer many advantages, there are also some disadvantages and costs associated with these fixtures.
The primary advantage of having a pot filler is the ease of filling large pots with water directly from the wall.
This eliminates the need to carry heavy pots of water around the kitchen, reducing strain on your back and arms.
Additionally, they can be easily turned off without having to lean over or reach behind appliances.
Pot filler installation costs can vary depending on the type of faucet you choose and any additional plumbing required for installation.
On average, it should cost anywhere from $200-$400 for installation, plus any additional parts or materials needed.
This does not include labor costs which could add up quickly depending on how complex the installation may be.
Generally speaking, most pot fillers have an expected lifespan of about 20 years when properly maintained and installed correctly.
Tools And Supplies Needed
Installing a pot filler in an existing wall requires some basic tools and supplies. Before beginning the installation process, it’s important to make sure you have everything you need.
Here’s a list of supplies and tools that may be helpful when purchasing and installing a pot filler in an existing wall.
- Appropriate water shut-off valves
- Stub-out pipe
- Threaded elbow
- ½-inch nipple
- 3 hole dropear 90
- Mounting plates
How to Install A Pot Filler Line?
Before installing a pot filler, you’ll need to run a water supply line to the desired location. Refer to the owner’s manual for specific instructions based on the model you’re installing.
To begin, turn off the water supply to the area where you’ll be working. This is important for safety reasons.
Next, you’ll need a short hose from the water supply. A pot filler typically requires a threaded elbow to direct water out of the wall and into the unit. You may need to attach a 1/2 inch nipple to do this.
Review the pot filler’s instructions carefully, as the specific specifications and stub length can vary by model. Once you’ve completed the rough piping, you can attach the pot filler.
The mounting mechanism can also vary by model, but most pot fillers come with mounting plates to attach them to the wall. You’ll typically mount the plate on the pipe and then screw it to the wall.
Some models have two attachment points that connect to the mounting plate. Others may come with clips or washers to attach the fixture to the water supply line.
Follow the installation instructions to install these parts and screw the pot filler tap to the pipe. Tighten the screws attaching the faucet to the mounting plate as needed.
After completing the installation, double-check your work to ensure it’s leak-free. Turn the water supply back on and place a bucket or pot under the pot filler.
Turn on the faucet to make sure the water flows smoothly without leaking. Let it run for a few minutes to clear any debris or impurities from the lines. If everything looks good, you’re all set!
Troubleshooting tips are key to preventing leaks and minimizing damage when installing a pot filler into an existing wall. When installing a pot filler, it’s important to use the appropriate tools for the job. Make sure that all of your connections are tightly secured with the proper fittings and clamps.
Use Teflon tape or some other type of pipe sealant on threaded connections to help prevent any water leakage. Additionally, make sure that all of your valves are closed before making any connections to avoid flooding the area with water.
Be mindful of where you’re drilling holes in the wall too—try to stay away from electrical wiring and plumbing pipes as much as possible so you don’t inadvertently cause any damage.
Also, if possible, try to position the pot filler away from direct sunlight to minimize wear and tear over time.
Taking these precautions will ensure that your installation goes smoothly and your new pot filler works perfectly for years to come.
With the right tools and supplies, and a bit of patience, anyone can do this project with great results.
If you run into any issues along the way, don’t panic. Troubleshooting tips are available to help guide you through any bumps in the road.
With these tips and a bit of determination, you’ll be able to achieve success just like me!