Removing an old kitchen faucet can be a daunting task, but fear not, as we have got you covered! With the right tools and instructions, removing your old faucet can be a breeze, leaving you one step closer to a beautiful new upgrade.
Whether you’re a seasoned DIY pro or just looking to save some money on hiring a plumber, this guide will walk you through the step-by-step process of removing your old faucet like a true expert. So, sit back, relax, and let us guide you through this process with ease and precision.
Table of Contents
Things You’ll Need
- Channel-type pliers or adjustable wrenches
- Basin wrench
- Penetrating oil spray (WD-40)
- Plumber’s putty
Step-by-Step Guide on How to Remove a Kitchen Faucet
Step 1: Turn off the water supply
Locating the shutoff valves under the sink and turning them off is the first step in removing a kitchen faucet. In some cases, there may be no shutoff valves, in which case, it is necessary to turn off the main water supply to the house. This is important because it prevents water from flowing out of the supply lines while you are working on the faucet.
Step 2: Disconnect the water supply lines
Once the water supply is turned off, the next step is to disconnect the water supply lines from the faucet. You will need to use an adjustable wrench to unscrew the nuts that hold the supply lines in place. It is essential to place a bucket under the sink to catch any water that may spill out. You may also need to use pliers to help loosen the nuts if they are stuck.
Step 3: Remove the mounting nuts
After disconnecting the water supply lines, the next step is to remove the mounting nuts that hold the faucet in place. The mounting nuts are located underneath the sink and can be removed using a basin wrench or pliers. It is essential to hold the faucet in place while removing the mounting nuts to prevent it from falling. In some cases, you may need to use penetrating oil to help loosen the nuts.
Step 4: Remove the faucet
Once the mounting nuts are removed, the next step is to remove the faucet from the sink. This can be challenging, especially if the faucet has been in place for a long time. You can use penetrating oil to help loosen the faucet. Apply the oil around the base of the faucet and let it sit for a few minutes. You can then use a screwdriver to gently tap the faucet to loosen it. Once the faucet is loose, you can lift it off the sink.
Step 5: Clean the sink
After removing the faucet, it is essential to clean the sink thoroughly. You can use a towel to wipe off any debris or residue left behind by the faucet. If there is any plumber’s putty on the sink, you can use a putty knife to scrape it off. This step is important because it ensures that the new faucet will have a secure and clean surface to attach to.
Step 6: Install the new faucet
Once the sink is clean, you can proceed to install the new faucet. This process involves following the manufacturer’s instructions carefully. You will need to use a plumber’s putty to seal the base of the faucet and then secure it in place using mounting nuts. You will then need to connect the water supply lines and turn on the water supply to test the new faucet. It is important to follow the manufacturer’s instructions carefully to ensure that the new faucet is installed correctly and functions properly.
In conclusion, removing a kitchen faucet may seem like a daunting task, but it can be done with the right tools and knowledge. By following the steps outlined above and taking your time, you can successfully remove an old faucet and install a new one. However, if you encounter any difficulties or are unsure about any step, it is advisable to seek the services of a professional plumber.