Are you struggling with a Brizo faucet handle that won’t budge? A leaky faucet or a stuck handle can be frustrating and can lead to wasted water and higher utility bills. Fortunately, removing a Brizo faucet handle is a fairly straightforward process that you can do yourself with the right tools and instructions.
In this blog post, we’ll guide you through the step-by-step process of removing a Brizo faucet handles. We’ll also cover common signs that your faucet handle may need to be replaced and provide tips on how to choose the right replacement handle for your Brizo faucet model.
Table of Contents
To remove your Brizo faucet handle, you’ll need a few tools:
- Adjustable wrench
- Phillips screwdriver
- Allen wrench
- Cloth or towel
How to remove brizo faucet handle step by step.
It’s important to follow these steps carefully to avoid damaging your faucet or injuring yourself.
Step 1: Turn off the water supply valves under the sink.
Before you start, make sure to turn off the water supply valves located under the sink. This will prevent any water from leaking or flowing out of the faucet and causing a mess. You can turn off the valves by turning them clockwise until they are completely closed.
Step 2: Use a 3/32″ hex wrench to remove the set screws on the handle.
Locate the set screw on the underside of the handle. This is usually located near the base of the handle and can be accessed by removing a decorative cap or cover. Once you have located the set screw, use a 3/32″ hex wrench to remove it.
Turn the wrench counterclockwise until the set screw is completely loose. Be sure to keep the set screw in a safe place so that you don’t lose it.
Step 3: Pull the handle straight up to remove it from the faucet.
Once the set screw is removed, you can pull the handle straight up to remove it from the faucet. If the handle is stuck, you can use a gentle back-and-forth motion to loosen it. Be careful not to use too much force, as this could damage the faucet.
Step 4: Use a strap wrench to loosen the bonnet nut
Locate the bonnet nut, which is usually located just above the faucet body. Use a strap wrench to loosen the bonnet nut by turning it counterclockwise.
Once the bonnet nut is loose, you can remove it by hand. Be careful not to drop the bonnet nut or any other parts down the drain.
Step 5: Lift the handle off the faucet body to access the cartridge.
Once the bonnet nut is removed, lift the handle off the faucet body to access the cartridge. The cartridge is part of the faucet that controls the flow of water. You may need to wiggle the handle a bit to loosen it.
Step 6: Use pliers to remove the retaining clip
Locate the retaining clip that holds the cartridge in place. This is usually located near the top of the cartridge. Use pliers to remove the retaining clip by squeezing it and pulling it out. Be careful not to damage the retaining clip or the cartridge.
Step 7: Pull the cartridge straight out of the faucet body.
Once the retaining clip is removed, you can pull the cartridge straight out of the faucet body. You may need to use a gentle back-and-forth motion to loosen the cartridge. Be careful not to use too much force, as this could damage the cartridge or the faucet.
Step 8: Clean the cartridge and faucet body
Before installing a new cartridge, cleaning the cartridge and the faucet body thoroughly is important. Use a soft cloth and a mild cleaning solution to remove any dirt, debris, or mineral deposits from the cartridge and the faucet body. This will ensure that the new cartridge operates smoothly and efficiently.
Step 9: Reassemble the faucet in reverse order
Once the cartridge and faucet body is clean, you can install the new cartridge and reassemble the faucet in reverse order. Be sure to tighten the bonnet nut securely with a strap wrench, but keep it from overtightening it.
Then, reinstall the handle by pushing it back onto the faucet body and tightening the set screw with the 3/32″ hex wrench. Turn the set screw clockwise until it is tight, but be careful not to overtighten it again.
Following these steps, you can replace your old cartridge with a new one and restore your faucet’s functionality.
How to Remove a Stuck Brizo Faucet Handle?
If your Brizo faucet handle is stuck and won’t come off, you can try the following steps to loosen it:
1. Apply heat to the handle – Use a hairdryer or heat gun to warm up the handle and surrounding area. This can help to expand the metal and make it easier to turn.
2. Use a strap wrench – If the handle still doesn’t budge, try using a strap wrench to grip it and turn it counterclockwise. Be sure to protect the handle with a cloth to prevent scratches.
3. Use penetrating oil – If the above methods don’t work, spray some penetrating oil, such as WD-40, around the base of the handle. Let it sit for a few minutes to allow the oil to penetrate, then try turning the handle again.
4. Use pliers – If the handle is still stuck, use a pair of pliers to grip the base of the handle and turn it counterclockwise. Use a cloth to protect the handle and avoid scratching it.
5. Use a handle puller – If none of the above methods work, try using a handle puller. This tool is designed to grip the handle and pull it off forcefully. Follow the manufacturer’s instructions carefully when using a handle puller.
It’s important to be patient and gentle when removing a stuck Brizo faucet handle. Using too much force or the wrong tools can damage the handle or the faucet. If you need help with what to do or if you find you’re not comfortable trying to remove the handle yourself, it’s best to consult a professional plumber.
Some common signs that your faucet handle may need to be replaced
Difficulty in turning on/off the water: If you are experiencing difficulty in turning on/off the water flow or if the handle is loose or wobbly, it could be a sign that the handle needs to be replaced.
Water leaking from the handle: If you notice water dripping or leaking from the handle even when the faucet is turned off, it may be due to a damaged or worn-out handle.
Rust or corrosion: If you see rust or corrosion on the handle or around the base of the faucet, it could be a sign of internal damage, which may require the handle to be replaced.
Squeaking or grinding noise: If you hear a squeaking or grinding noise when you turn the handle, it may indicate that the internal parts are worn out and the handle needs to be replaced.
Old or outdated appearance: If the faucet handle looks outdated or worn out, it may be time to update it with a new one that complements your bathroom décor.
If you notice any of these signs, it’s best to replace the faucet handle to prevent further damage or leaks.
Are Brizo handles interchangeable?
Yes, some Brizo handles are interchangeable, but it depends on the model and series of the faucet. It’s important to check the manufacturer’s specifications to ensure compatibility before attempting to switch out handles.
What tools do I need to remove a Brizo faucets handle?
You’ll need an adjustable wrench, Phillips screwdriver, Allen wrench, and a cloth or towel.
Can I remove a Brizo faucet handle without any tools?
No, you’ll need at least an Allen wrench to remove the set screw.
Why do I need to turn off the water supply before removing the handle?
This is important to prevent any water from spraying out of the faucet when you remove the cartridge.
How often should I clean my Brizo faucet? It’s recommended to clean your faucet at least once a month to prevent mineral buildup.