How to Remove Delta Shower Handle

 Are you tired of dealing with a stubborn Delta shower handle that just won’t budge? Maybe it’s stuck, broken, or just needs a good cleaning. Whatever the issue may be, removing a Delta shower handle can seem like a daunting task for even the most experienced DIYer. But fear not.

With the right tools and a little know-how, you can have that handle off in no time. In this guide, we’ll walk you through the steps to remove your Delta shower handle with ease. So, grab your toolbox and let’s get to work.

The Tools Needed to Remove a Delta Shower handle

1. Allen wrench or hex key

2. Screwdriver (slot and flathead)

3. Plastic card or non-metallic tool (optional)

4 Easy Steps to Remove Delta Shower Handle

Locate the set screw

The first thing you need to do is find the set screw that secures the handle to the stem unit beneath. This screw is usually located under a small cap on the handle’s base.

Look closely at the handle, and you should be able to spot it.

If you’re having trouble finding it, try shining a flashlight on the handle to illuminate it.

Remove the cap

Once you’ve located the set screw, you’ll need to remove the cap covering it. You can usually do this by prying it off with a flathead screwdriver or a similar tool.

Be careful not to damage the cap or the handle while you’re doing this.

Remove the set screw

Now that you’ve exposed the set screw, you can use an Allen wrench or a Philips screwdriver to remove it.

Make sure you choose the right tool for the job, as using the wrong one could damage the screw or the handle.

Once you’ve inserted the tool into the screw, turn it counterclockwise to loosen it.

Remove the handle

With the set screw removed, you should be able to pull the handle off the stem unit. Depending on how tightly the handle is attached, you may need to wiggle it back and forth a bit to get it to come loose.

Be gentle, though, as you don’t want to damage the stem unit or any of the other parts.

That’s it! With the handle removed, you should be able to access the other parts of your Delta shower and make any necessary repairs or replacements.

Just be sure to keep all the parts organized and be careful not to lose anything while working.

How to Remove Delta Shower Handle with No Set Screw?

Step 1: Identify the type of handle you have

If your Delta shower handle has no visible set screw, it might be a push-fit handle, or it might have a hidden screw underneath a cap.

You need to identify your handle type before attempting to remove it.

Step 2: For a Push-Fit Handle, pull the handle straight away from the faucet body

If you have a push-fit handle, start by aligning the handle with the spout and then pulling it straight away from the faucet body.

This may require some force, but the handle should come off without the need for any tools.

Step 3: Look for a small cap on the handle’s base

If your Delta shower handle does not come off easily, look for a small cap on the handle’s base. This cap can be removed using a flat screwdriver.

Once the cap is removed, it should reveal a screw that can be removed to take off the handle.

Step 4: Remove the screw

Use a screwdriver to remove the screw that was revealed when the cap was removed. Be careful not to strip the screw, as this will make it more difficult to remove the handle.

Once the screw is removed, the handle should come off easily.

Step 5: Twist the handle to loosen it from the stem unit beneath

If you cannot find a screw under the cap, try twisting the handle to loosen it from the valve stem unit beneath.

Be careful not to twist too hard, as this could damage the stem unit. Once the handle is loosened, it should come off easily.

Step 6: Use WD-40 and pliers

If none of the above methods works, you can try using WD-40 to loosen the nut holding the handle in place.

Spray the WD-40 onto the nut and let it sit for a few minutes.

Then, use pliers or an Allen wrench to turn the nut counterclockwise. This should loosen the nut and allow you to remove the handle.

How To Remove A Stuck Delta Shower Faucet Handle?

Tools needed to remove a stuck set screw

1. Hex key or Allen wrench

2. Penetrating oil like WD-40

3. Drill bit (optional)

4. Heat gun (optional)

Steps to Remove A Stuck Delta Shower Faucet Handle

First, turn off the water supply to the shower. This will prevent any water from accidentally spilling out while you work on the faucet.

Try slowly but forcefully turning the faucet handle past its resistance point with it in the on position. This can help loosen any sediment or buildup that may be causing the handle to stick.

If the handle is still stuck, use a screwdriver to remove the Delta faucet handle by hand.

Then, use an Allen wrench to loosen the set screw that holds the handle body in place. This will allow you to remove the handle and access the valve or cartridge inside.

If none of these methods works, you can use a hairdryer to heat up the handle. Heat the handle for a few minutes, then try using pliers or a wrench to turn it counterclockwise. This can help loosen any corrosion or rust that may be causing the handle to stick.

Once you’ve removed the handle, you can inspect the valve or cartridge inside. If you need to replace this part, now is a good time to do so.

To reassemble the faucet, simply reverse the steps above. Replace the valve or cartridge, slide the handle back onto the faucet body, and tighten the set screw.

Remember, it’s important to use even force when trying to remove a stuck Delta shower faucet handle. Don’t use too much force or you may damage the faucet or injure yourself.

How to Remove Delta Monitor Shower Handle

Tools needed 

• Allen wrench or hex key (3/32″ for handle pairs and 1/8″ for single-handle faucets)
• Adjustable wrench or channel lock pliers (optional)

Steps to Remove Delta Monitor Shower Handle

Locate the small cap on the handle’s base

1. The first step is to locate the small cap on the handle’s base. This cap is usually located at the bottom of the handle, covering the set screw that holds the handle in place. Use a flathead screwdriver to pry off the cap.

Remove the set screw

Once you have removed the cap, use an Allen wrench or hex key to unscrew the set screw that is holding the handle in place.

It is important to note that some Delta Monitor shower handles may have a Phillips head screw instead of a set screw, so make sure to use the correct tool.

Pull off the hand

After removing the set screw, you should be able to pull off the handle from the stem unit beneath. However, if the handle is difficult to remove, try wiggling it gently back and forth to loosen it from the stem unit. You may also use a handle puller tool if necessary.

Inspect the stem unit

Once you have removed the handle, inspecting the stem unit for any signs of damage or wear is a good idea. The stem unit is the piece that connects the handle to the faucet and controls the water flow.

If you notice any issues with the stem unit, it may need to be replaced.

Reassemble the handle

If you only need to remove the handle for cleaning or replacement purposes, you can reassemble it by reversing the steps above. Make sure to tighten the set screw securely and replace the small cap.

How Much Does a Plumber Charge to Remove a Delta Shower Handle?

The cost of hiring a plumber to remove a Delta shower handle knob can be difficult to estimate, as it may vary depending on a variety of factors. However, it is important to note that the price of the service will typically include the plumber’s time and expertise, as well as any necessary tools or materials.

However, based on similar services, it is possible to get a general idea of what the cost might be. For example, a shower valve replacement, which includes removing the old valve and installing a new one, may cost between $200 and $600.

This price range could potentially apply to the removal of a Delta shower handle, although it is important to note that this is just an estimate.

This will allow you to compare prices and choose a plumber offering a fair job rate. Remember that the final cost may vary depending on the complexity of the job, the location, and the plumber’s level of experience.

FAQ

What size Allen wrench for the delta shower handle

The Allen wrench size for a Delta shower faucet is 3/32″ Imperial metric size.

What is a set screw hole?

A set screw hole is a small opening or indentation on a surface to hold a set screw in place.

What type of lubricant is best for preventing set screws from getting stuck

Penetrating oil is the best type of lubricant for preventing set screws from getting stuck. Penetrating oils are designed to loosen stubborn nuts, bolts, and other metal parts fused from rust or corrosion.

They can also lubricate bolts and other fasteners so that they can be removed easily. Some examples of penetrating oils include Kroil, WD-40, and vegetable oil mixed with acetone.