Removing a faucet handle with no visible screws can be tricky, but it can be done with the correct tools and some know-how. In this guide, we’ll show you how to remove a faucet handle with no visible screws, including those found on double-handle faucets, and single-handle faucets.
Tools you need
First, you’ll need to gather the right tools for the job.
- flat head screwdriver
- An Allen wrench
- needle-nosed pliers
- And a set screw.
Table of Contents
How To Remove A Button Faucet
To remove the handle of a button faucet, follow these steps:
1. Turn off the water supply
Locate the shutoff valves beneath the sink and turn them off. This is an important safety step to prevent any water from flowing while you are working on the faucet.
2. Remove the button
Use a plastic card or non-metallic tool to pry off the hot/cold button on top of the faucet handle. If there isn’t a visible set screw, look for a small button or cap that covers it. Wedge the corner of a flathead screwdriver underneath the cap and carefully pry it away from the faucet.
3. Loosen the set screw
Use a hex key to loosen the set screw located inside the hole where the button was removed. Turn the key counterclockwise to loosen the set screw.
4. Remove the handle
Once the set screw is loosened, the handle should come off easily. Simply lift it off the faucet and set it aside.
5. Clean the handle and area
Use a toothbrush soaked in vinegar to remove any dirt and mineral deposits from the area where the button was located. Dry the handle with a cloth.
How To Remove Double Faucet Handles
Here are the steps you can follow to remove the double faucet handles
1. Turn off the water supply
Before starting the process, ensure that you turn off the water supply to the faucet to avoid any leaks or water damage.
2. Determine the type of Screws
Check whether your double faucet handle has screws or caps. If it has screws, locate the set screw on top of each handle using a Phillips head screwdriver. Use needle-nosed pliers to remove any decorative caps, if present.
If your faucet handle has no visible screws, check for a small cap located at its base, which you can pop off with a small screwdriver.
3. Remove the faucet handle
Use an Allen wrench or small screwdriver to unscrew the set screw or screw located on top of each handle. If there are no screws, hold onto the arm of the faucet handle and twist the base counterclockwise. Use pliers if necessary. Carefully remove the handle of the faucet.
4. Remove the faucet cartridge
Use a faucet handle puller or a pair of pliers to remove the top piece of the faucet handle to expose the cartridge inside. Grab the cartridge and pull it straight out. I
f the cartridge is stuck, use a pair of pliers to gently wiggle it loose. You can also use distilled white vinegar to dissolve any mineral deposits that may be holding the cartridge in place.
5. Replace the cartridge
Purchase a new cartridge online or from a hardware store. Insert the new cartridge into the faucet in the same orientation as the old one. Ensure that the cartridge is aligned correctly and push it all the way in.
6. Reassemble the faucet handle
Reverse the order of the steps above to reassemble the faucet handle. Put back the top piece of the faucet handle and tighten the screws or set the screws clockwise.
If your faucet has a lever-style handle, turn the handles clockwise until they are tight. If your faucet has hot water buttons, place them back in their original position.
7. Turn on the water supply.
Turn on the water supply and check for any leaks. If there are no leaks, you have successfully removed and replaced your double faucet handles.
How To Remove Single Handle Faucets
If you need to remove a single-handle faucet, you can do it with just a few simple steps. First, turn off the water supply under the sink to prevent leaks or damage.
Make sure to have a bucket or container ready to catch any water that may still be in the lines. Next, disconnect the supply lines from the faucet using an adjustable wrench, placing an old towel or rag underneath to catch any excess water.
Once the supply lines are disconnected, you can remove the faucet. Depending on the model, you may need to unscrew the mounting nuts or remove the faucet and veggie sprayer.
When removing the mounting nuts, it is important to cushion the jaws of your wrench to avoid damaging the smooth, rounded body of the cap. You can use rubber tape to help with this.
After removing the mounting nuts or faucet and veggie sprayer, you should be able to lift the faucet off of the sink. If you have trouble, you can use a faucet handle puller to help loosen it.
Once the faucet is removed, you may notice mineral deposits or other buildups on the sink or faucet itself. To gently clean these areas, you can use distilled white vinegar and a toothbrush.
How can I remove Faucet Handle That Has A Cap?
There are several ways to remove a cap faucet handle
If the cap unscrews, you can use an adjustable wrench wrapped in a scrap of cloth to grip the cap and turn it counterclockwise. The pressure from the wrench should loosen the cap, and the cloth will protect the finish on the cap.
If there is a small indentation where the cap meets the faucet piece under it, you can insert a thin knife or flat screwdriver into the indentation and pry off the cap. Be careful not to damage the faucet or the cap while prying it off.
For a pop-off cap, wedge the corner of a screwdriver’s flat edge underneath it and carefully pry it away from the faucet. Use a gentle touch, and do not damage the cap or the faucet while prying it off.
So, there you have it, folks! You now have the tools and knowledge to remove your faucet handles independently without calling in the professionals. With just some basic tools from the garage and an old towel, you can easily complete this plumbing job.
How do you remove a faucet handle when the set screw is stripped?
To remove a stripped set screw from a faucet, you can try placing a rubber band over the stripped screw and using a flathead screwdriver or an electric drill with a screw extractor to grip the screw head.
It’s important to be careful not to damage the faucet during the process, and if all else fails, power tools may be necessary.
How many types of shower faucets are there?
Standard shower faucets, shower systems, or tub-and-shower faucet combos are three types of Shower faucets.
How Does the bathroom sink drain work
A bathroom sink drain allows water to flow through the trap and drainpipe and then exit through the drain. The trap’s curved portion captures some of the water, which creates a seal and prevents sewer gases from entering the sink drain.