How to Replace a Kohler Flush Valve Gasket 83996

A Kohler flush valve gasket 83996 is a rubber seal that prevents water from leaking between the flush valve and the tank of your Kohler one-piece toilet. The flush valve is the part that controls the flow of water from the tank to the bowl when you flush the toilet.

Over time, the flush valve gasket may wear out, crack, or become loose. This can cause water to leak from the tank and reduce the flushing performance and water efficiency of your toilet. In that case, you may want to replace it with a new one.

But how do you replace a Kohler flush valve gasket 83996? Unlike some other toilet gaskets that are visible and easy to access, a Kohler flush valve gasket 83996 is hidden inside the tank and attached to an anchor that holds the flush valve in place.

This makes it harder to remove and install a new flush valve gasket, but not impossible. In this blog post, we will show you how to replace a Kohler flush valve gasket 83996 in a few simple steps.

Tools Needed

You will need a flathead screwdriver, a pliers, and a new flush valve gasket for this task.

How to Replace a Kohler Flush Valve Gasket 83996

Step 1: Turn Off the Water Supply and Drain the Tank

The first step is to turn off the water supply to your toilet and drain the tank. To do this, you will need to locate the shut-off valve behind or below your toilet and turn it clockwise until it stops.

Then, you will need to flush your toilet and hold down the handle until all the water drains from the tank. You may also need to sponge out any remaining water from the bottom of the tank.

Step 2: Remove the Flush Valve Cover and Unscrew the Flush Valve

The next step is to remove the flush valve cover and unscrew the flush valve from the tank. To do this, you will need to lift up the flush valve cover from the top of the tank and set it aside.

Then, you will need to use a flathead screwdriver to unscrew the flush valve from the anchor inside the tank. You may need to hold the anchor with a pliers to prevent it from spinning.

Step 3: Remove the Old Flush Valve Gasket and Install the New One

The final step is to remove the old flush valve gasket and install the new one. To do this, you will need to pull out the old flush valve gasket from the bottom of the flush valve and discard it.

Then, you will need to insert the new flush valve gasket into the bottom of the flush valve and make sure it fits snugly.

Step 4: Reattach the Flush Valve and Flush Valve Cover

The last step is to reattach the flush valve and flush valve cover to the tank. To do this, you will need to align the flush valve with the anchor inside the tank and screw it back in place with a flathead screwdriver. Then, you will need to snap on the flush valve cover over the flush valve and make sure it fits securely.

That’s it! You have successfully replaced your Kohler flush valve gasket 83996. You can now turn on the water supply and test your toilet for any leaks or malfunctions.

FAQs

Q: What is a Kohler flush valve gasket 83996?

A: A Kohler flush valve gasket 83996 is a rubber seal that prevents water from leaking between the flush valve and the tank of your Kohler one-piece toilet. The flush valve is the part that controls the flow of water from the tank to the bowl when you flush the toilet.

Q: How do I know if I need to replace my Kohler flush valve gasket 83996?

A: You may need to replace your Kohler flush valve gasket 83996 if you notice any of these signs:

• Water leaking from the tank or the base of the toilet
• Weak or incomplete flushing
• Constant running or refilling of the tank
• High water bills due to water waste

Q: How do I find the right Kohler flush valve gasket 83996 for my toilet?

A: To find the right Kohler flush valve gasket 83996 for your toilet, you will need to check the model number of your toilet. You can find the model number on a label inside the tank or on the underside of the tank lid. You can also use a tape measure to measure the diameter of your flush valve and compare it with the dimensions of the flush valve gasket.

Q: How do I prevent my Kohler flush valve gasket 83996 from wearing out or leaking?

A: To prevent your Kohler flush valve gasket 83996 from wearing out or leaking, you will need to follow these tips:

• Avoid using harsh or abrasive cleaners or chemicals that can damage or corrode the rubber material
• Clean and inspect your flush valve and gasket regularly and remove any dirt or debris that can cause clogging or deterioration
• Replace your flush valve gasket every 3 to 5 years or as needed