How to Remove a Single Handle Kitchen Faucet

When it comes to tackling home improvement projects, removing a single-handle kitchen faucet can seem like a daunting task. However, with the right tools and some patience, it’s a job that you can do yourself. Here are the steps to remove a single handle kitchen faucet, as well as some tips to make the job easier.

Step 1: Gather Supplies

Before starting the process of removing your kitchen faucet, you’ll need the proper tools and supplies. To begin, gather a basin wrench, adjustable pliers, and a pair of channel-type pliers. Additionally, you may want to add a hose clamp to your list of supplies, as well as a replacement gasket just in case.

Step 2: Turn off the Water

Once your supplies are gathered, it’s time to turn off the water. Before you can remove your faucet, you need to turn off the water so that you don’t end up flooding your kitchen. You can do this by turning off the water supply at the shut-off valves under your sink or at the main water shut-off valve in your home.

Step 3: Remove the Faucet Handle

Now that the water is shut off, it’s time to start the process of removing your single handle kitchen faucet. The first step is to remove the faucet handle. To do this, use the adjustable pliers to loosen the screw on the handle and then pull the handle off of the faucet. If the handle is tight and won’t budge easily, you may need to use a bit of lubricant to make the job easier.

Step 4: Disconnect the Supply Lines

Once the handle is off, it’s time to disconnect the supply lines. You’ll need to do this using the basin wrench. Place the wrench over the supply lines and carefully unscrew them. Make sure to have a bucket or bowl handy to catch any water that may come out.

Step 5: Remove the Faucet

The last step is to remove the faucet itself. To do this, use the channel-type pliers and carefully rock back and forth until the faucet comes off

Step 6: Re-Installing the Faucet

Once the old faucet is removed, it’s time to begin the process of re-installing the new one. The process is essentially the same as when you removed the old one but in reverse. Start by attaching the mounting plate to the sink, and then the faucet to the plate. From there, connect the supply lines and then the handle. Then, turn the water back on and check for any leaks.

Precautions to Take

When you’re removing a single handle kitchen faucet, it’s important to take your time and use the right tools for the job. Using an adjustable wrench or a pair of large pliers instead of a basin wrench can make the job more difficult and could result in damage to the plumbing. Additionally, if you’re dealing with a particularly tight faucet, you may need to use a bit of lubricant to help loosen it.